Do go thu khoa Do go thu khoa Do go thu khoa Do go thu khoa Do go thu khoa Do go thu khoa
Rising Oil Costs and Environmental Concerns 
Resource Responsibility

Consumer Automotive Bypass Filter Applications



consumer1 consumer2

The cleanliness of your engine fluid is crucial to the trouble-free and cost-effective operation of your engine system. Engine components are costly and need special consideration when this fluid is selected and subsequently filtered.

The ISO 4406 Code is a recognized standard in the industry. Certain recommended cleanliness quantities are necessary to realize the most efficient performance of your system.

As soon as you start your engine, you begin the deterioration process of your oil. As the engine runs, dirt, wear metal particles, fuel, soot, and water start to weaken your oil's lubrication and protection properties. These harmful elements can be eliminated by an oil drain, but once the oil is replaced, the deterioration process just starts over again.

We have been taught that regular oil drains and filter changes are required to protect our engines and hydraulic systems. The Kleenoil Bypass Filtration System, however, allows us to extend the time between oil drains as well as reducing the adverse effects of harmful particles in the engine.

Normal spin on full-flow filters on your car or truck have approximately 90 to 130 quarts of oil passing through the filter media each minute. As a result, the fluid passes through so quickly that it cannot be finely filtered, nor can water be removed. While the film of oil between moving parts in an engine is generally about 3 microns, regular oil filters only filter down to between 15 and 40 microns.

The Kleenoil Bypass filter, however, is a bypass filter that passes only a small portion of the total oil flow through a very dense filtering media at about 2.5 quarts per minute. At this speed, it is possible to remove particles down to 1 micron and totally remove water, greatly decreasing engine wear and prolonging oil life.

Key Benefits of Kleenoil Bypass Filter for Consumer Automobiles and Truck Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Remove's all wear causing particles down to 1-micron in size.
  • Reduce time needed for service...those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use

Kleenoil Bypass Filter Systems can be a valuable addition for your truck or automobile if:

  • You put a large amount of miles/hours on your vehicle annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Vehicle downtime is simply not an option.
  • You simply want the ultimate in protection for your vehicle and want to maximize the life of the engine or transmission.


Consumer Automotive Oil Analysis Sample Reports



Consumer Automotive Application Pictures